VERSATILE: CORNER, JOINER OR END POST

Whites Screen Up Freestanding Corner Post is a versatile and decorative addition to the Screen Up range. Build a complete privacy screen that spans longer distances without wall or post support. It anchors securely to the ground for a complete freestanding solution.

Easy as 1-2-3:

1. Position and fix the post
2. Measure and cut timber to size
3. Insert timber, spacers and end caps

The 3-way post is a square profile and can be used to create 90° corners, as a joiner for straight runs of screening, or as an end post. It is available in 2 heights: 1.1m and 2m.

The 1.1m pack comes with step-by-step assembly instructions and contains:

• 3-way Corner Post (x1)
• 19mm Spacers (x28)
• 10mm Spacers (x6)
• Brace/Cover Strip (x2)
• Lock-in Brackets (x3)
• Post Cap (x1)

As a general guide, the 1.1m post will hold 10 slats @ 90mm width or 12 slats @ 70mm width.

The 2m pack comes with step-by-step assembly instructions and contains:

• 3-way Corner Post (x1)
• 20mm Spacers (x66)
• 10mm Spacers (x3)
• Brace/Cover Strip (x2)
• Lock-in Brackets (x3)
• Post Cap (x1)

As a general guide, the 2m post will hold 18 slats @ 90mm width or 22 slats @ 70mm width.

Also available in 2-way configuration, click here for more information. 

Handy Hints:

• Select the correct mounting base: if you are fixing the post to an existing surface, use the Base Plate (code 16860); if you are pouring your own concrete base, use the Anchor Plate (code 16861).
• For greater privacy, or slimline look, use Screen Up Slimline Spacers (16870) that provide a 10mm gap between slats (regular gap 20mm).
• Button head screws (15mm) are recommended for fixing bracing and lock-in brackets.
• Use with Screen Up Wall Mount for a wall-mount start or end. Both freestanding and wall-mount systems fit together perfectly to create an integrated privacy screen.